SUBMERSIBLE PUMP SERIES
SUBMERSIBLE PUMP SERIES• For water supply from wells or reservoirs.
• For domestic use for civil and industrial applications.
• For garden use and irrigation.
• Maximum fluid temperature up to +35℃ .
• Maximum sand content: 2%.
• Maximum immersion：120m.
Minimum well diameter:3"
• stainless steel and cast-Iron pump outlet, connector, oil-housing are available
• 304 stainless steel welding shaft
• NSK bearing
• Other voltage or frequency is 60Hz
• Rewindable motor
• Single-phase: 150V-240V/50Hz
• Equip with start control box or digital auto-control box
• Pumps are designed by casing stressed
• NEMA dimension standards
• Curve tolerance according to ISO 9001
1.0" , 1.25"
| COMPONENTS | MATERIAL |
| Pump casing | AISI 304SS/201SS |
| Outlets | Cast-Cu |
| Inlets | Cast-Cu |
| Strainer | AISI 304SS |
| Diffuser | PC |
| Impeller | POM |
| Pump shaft | AISI 304SS/201SS |
| Shaft coupling | AISI 304SS/201SS |
| Motor casing | AISI 304SS/201SS |
| Mechanical seal | Graphite-ceramic/TC |
| Top chock | Cast-Cu/Cast-iron |
| Motor shaft | AISI 304SS |
| Bearing | NSK/C&U |
| Seal lubricant oil | 10#White Oil |
| Type | Motor power | Delivery N≈2850 r/min | ||||||||||||||
| Single-Phase | KW | HP | M3/h l/min | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 | 3.0 | 3.3 | 3.6 |
| 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | ||||
| WP3SDM2.5/8 | 0.25 | 0.33 | H(m) | 32 | 32 | 31 | 30 | 30 | 29 | 27 | 26 | 24 | 21 | 18 | 13 | 9 |
| WP3SDM2.5/11 | 0.37 | 0.5 | 44 | 43 | 43 | 42 | 41 | 39 | 37 | 35 | 32 | 29 | 24 | 18 | 13 | |
| WP3SDM2.5/16 | 0.55 | 0.75 | 64 | 63 | 62 | 61 | 59 | 57 | 54 | 51 | 47 | 42 | 35 | 27 | 18 | |
| WP3SDM2.5/21 | 0.75 | 1.0 | 84 | 83 | 82 | 80 | 78 | 75 | 72 | 68 | 62 | 56 | 46 | 35 | 24 | |
| WP3SDM2.5/30 | 1.1 | 1.5 | 124 | 122 | 121 | 118 | 115 | 111 | 106 | 100 | 91 | 82 | 68 | 52 | 36 | |
